Buy at this store.See Detail Online And Read Customers Reviews Remington 700 Special Triggers Triggertech prices throughout the online source See individuals who buy "Remington 700 Special Triggers Triggertech" Make sure the shop keep your private information private before you purchase Remington 700 Special Triggers Triggertech Make sure you can proceed credit card online to buyRemington 700 Special Triggers Triggertech and the store protects your information from fraudulents Make sure the customer support is obviously there to aid you when you place Remington 700 Special Triggers Triggertech order with them

Content:

Remington 700 Special Triggers Triggertech.

$184.99 - $194.99
The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington ...

Product Description

The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington 700 model rifle. Utilizing CLKR Technology™, and some additional hand refinements, the pull weight on the Special model is quickly and confidently adjusted from 1.0 - 3.5 lbs in ~1oz increments from an externally accessible set screw. Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. Just like the Primary model, this drop-in trigger provides a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Ar-15/ar 308 Hi-Speed National Match Trigger Set Geissele Automatics Llc.

$279.00
Geissele’s Hi-Speed National Match AR-15 Trigger combines their exceptional match-grade trigger with their Service Rifle, Designated Marksman Rifle, and Match Rifle Spring ...

Product Description

User-Adjustable, Adaptable Premium Trigger

Geissele’s Hi-Speed National Match AR-15 Trigger combines their exceptional match-grade trigger with their Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets. Geissele’s adjustable Hi-Speed National Match AR-15 Trigger is designed for competition, hunting, and tactical sniper use, where exact trigger pull weight is essential for success.

The trigger comes with three spring sets, each applicable to a different type of shooting. The Hi-Speed Service Spring is designed for NRA High Power Service Rifle competition and is approved for use in CMP sanctioned competitions. Easily switch to the Hi-Speed Designated Marksman Rifle spring set for tactical and military shooting where trigger pull weight is not regulated. Hi-Speed Match spring set can be adjusted to low pull weights for enhanced trigger control, letting the shooter wring every ounce of accuracy out of his rifle

  • Service Rifle pull: 3.2-5 lbs. (1st), .5 to 1.5 lbs. (2nd), 4.5 lbs. min. (total)
  • DMR pull: 2.5 to 3.6 lbs. (1st), .5 to 1.5 lbs. (2nd), 3 to 5.1 lbs. (total)
  • Match Rifle pull: 1.5 to 2.5 lbs. (1st), 8 oz. to 14 oz. (2nd), 1.9 to 3.4 lbs. (total)

With the Geissele Hi-Speed National Match Trigger in your AR-15, you can easily adjust the triggers first and second stage weight, as well as total pull weight and overtravel to your exact preference.


Big Book Catalog, Issue:71, Page:029

Ar-15 Mpc Drop-In Triggers Velocity Triggers.

$172.99
One of the best elements of the AR-15's flexibility and modularity is the ability of owners to install a one-piece trigger unit ...

Product Description

Enhances Your AR-15's Trigger Pull

One of the best elements of the AR-15's flexibility and modularity is the ability of owners to install a one-piece trigger unit to enhance the trigger style and pull on their gun. One of the upgrade options on the market is the Velocity Triggers MPC Drop-In Trigger.

The Velocity Triggers MPC Drop-In Trigger is a single-stage trigger design produced for the utmost in precision shooting and can be had in a variety of different set-ups, all fine-tuned to fit the end user.

  • Pull weight can be set between 3-4 pounds
  • Can be had with straight, straight with a finger stop or curved triggers
  • Different colors available

The Velocity Triggers MPC Drop-In Trigger can also be ordered in a range of different texture options, including smooth, rounded or serrated to fit user preferences.

Ar-15 Drop-In Trigger Module Solid Shoe Timney.

$214.99
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels ...

Product Description

Obtain A Super-Smooth Pull & Crisp Letoff In Minutes

Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe with choice of 3 lb, 4 lb. or 4.5 lb. pull weight.

NOTE: For use in a polymer lower, a special plate is required which can be obtained directly from Timney at (623) 223-1111.


AR-15, Issue:11, Page:029
Big Book Catalog, Issue:71, Page:031
Sinclair, Issue:5B, Page:254

SPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trigger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR-15s with sear block.

Trigger-Happy Kit Wild West Guns.

$113.99 - $125.99
Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying ...

Product Description

Gives A Light, Clean Break, Without The "Flop"

Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying flop of the Marlin factory trigger. Produced to minimum tolerances, gives a safe, light trigger that helps improve accuracy for hunters; helps give Cowboy shooters that winning edge. Drop-in fit; installation requires complete action disassembly.

Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.


Big Book Catalog, Issue:71, Page:167

SPECS: Tool steel. Blue, matte finish or Nickel, silver finish. Hardened engagement surfaces. Fits all modern Marlin centerfire rifles; 1895, 1895G, 1895GS,1895M, 450M, 444, 336, and 1894 models. Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.

Super Scar Trigger Geissele Automatics Llc.

$325.00
The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and ...

Product Description

The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant.


Big Book Catalog, Issue:71, Page:165

SPECS: The Geissele SCAR has a total pull weight of about 4.5lbs – 2.5lbs on the first stage and 2lbs on the second stage. The pull weight and sear engagement are not adjustable by the shooter.

Ar-15 Gen. 2 Mod. 2 Non-Rotating Pin Set Kns Precision, Inc..

$29.99
Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard ...

Product Description

Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins

Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard .154" diameter pins, oversized .155" pins, or .170" pins for large-pin receivers.


AR-15, Issue:11, Page:030
Big Book Catalog, Issue:71, Page:032

SPECS: Carbon steel anti-rotation links and retaining screws, matte black finish. Kit includes hammer pin, trigger pin, (2) low-profile anti-rotation links, (2) screws, hex wrenches, and installation tool.

Sig Sauer Mpx Single Stage Triggers Timney.

$211.46
When SIG Sauer released its revolutionary MPX platform, it was set to revolutionize the pistol-caliber subgun market. Now, with the launch of ...

Product Description

Enhance Your MPX Trigger

When SIG Sauer released its revolutionary MPX platform, it was set to revolutionize the pistol-caliber subgun market. Now, with the launch of the Timney Triggers MPX Single-Stage Trigger, owners can take this enhanced platform to an even higher level.

Designed to enhance the feel above the OEM trigger design, the Timney Triggers MPX Single-Stage Trigger drops right into the receiver of the MPX without any modification. Each trigger assembly is built with components made from heat-treated steel, all contained in an aluminum-alloy housing with an anodized finish.

Each Timney Triggers MPX Single-Stage Trigger is set from the factory for a pull weight of 3 pounds and cannot be adjusted. The trigger is compatible with all factory and aftermarket safeties on the MPX platform.

Ar-15 Saber Drop In Single Stage Trigger James Madison Tactical.

$94.99
With a fast reset, a smoother, crisper, lighter trigger pull, The single-stage trigger group is easy to install. Features: ...

Product Description

With a fast reset, a smoother, crisper, lighter trigger pull, The single-stage trigger group is easy to install.

Features:

  • Single-stage
  • Works for both AR-15 and AR-308 type rifles
  • 3.5- 4.0 lb. pull weight
  • Quick reset for faster response time between shots
  • Lightened trigger pull with super-crisp release to improve accuracy
  • Curved skeleton trigger function and comfort
  • Self-contained design makes it easy and quick to install with no fine-tuning needed
  • Quality 17-4 Stainless steel hammer, trigger and disconnect
  • Precision CNC and EDM machined from high-grade 6061-T6 aluminum and 17-4 ph SS
  • Contained in JMT’s signature metallic silver anodized aluminum housing
  • Comes with anti-rotation pins

Note: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.


Big Book Catalog, Issue:71, Page:030

Ar-15 Enhanced Military-Style Triggers Alg Defense.

$53.99 - $75.99
Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. ...

Product Description

Gives A Smoother Pull While Preserving Reliability

Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6½ lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs.


AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:255

SPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high-carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, 2 hammer springs, disconnnector, disconnnector spring, hammer and trigger pins, and instructions.?