"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15 Drop-In Trigger Module Solid Shoe Timney You will not regret if check price."  compare Ar-15 Drop-In Trigger Module Solid Shoe Timney

Content:

Ar-15 Drop-In Trigger Module Solid Shoe Timney.

$214.99
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels ...

Product Description

Obtain A Super-Smooth Pull & Crisp Letoff In Minutes

Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe with choice of 3 lb, 4 lb. or 4.5 lb. pull weight.

NOTE: For use in a polymer lower, a special plate is required which can be obtained directly from Timney at (623) 223-1111.


AR-15, Issue:11, Page:029
Big Book Catalog, Issue:71, Page:031
Sinclair, Issue:5B, Page:254

SPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trigger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR-15s with sear block.

Trigger-Happy Kit Wild West Guns.

$113.99 - $125.99
Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying ...

Product Description

Gives A Light, Clean Break, Without The "Flop"

Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying flop of the Marlin factory trigger. Produced to minimum tolerances, gives a safe, light trigger that helps improve accuracy for hunters; helps give Cowboy shooters that winning edge. Drop-in fit; installation requires complete action disassembly.

Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.


Big Book Catalog, Issue:71, Page:167

SPECS: Tool steel. Blue, matte finish or Nickel, silver finish. Hardened engagement surfaces. Fits all modern Marlin centerfire rifles; 1895, 1895G, 1895GS,1895M, 450M, 444, 336, and 1894 models. Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.

Super Scar Trigger Geissele Automatics Llc.

$325.00
The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and ...

Product Description

The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant.


Big Book Catalog, Issue:71, Page:165

SPECS: The Geissele SCAR has a total pull weight of about 4.5lbs – 2.5lbs on the first stage and 2lbs on the second stage. The pull weight and sear engagement are not adjustable by the shooter.

Ar-15 Gen. 2 Mod. 2 Non-Rotating Pin Set Kns Precision, Inc..

$29.99
Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard ...

Product Description

Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins

Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard .154" diameter pins, oversized .155" pins, or .170" pins for large-pin receivers.


AR-15, Issue:11, Page:030
Big Book Catalog, Issue:71, Page:032

SPECS: Carbon steel anti-rotation links and retaining screws, matte black finish. Kit includes hammer pin, trigger pin, (2) low-profile anti-rotation links, (2) screws, hex wrenches, and installation tool.

Sig Sauer Mpx Single Stage Triggers Timney.

$211.46
When SIG Sauer released its revolutionary MPX platform, it was set to revolutionize the pistol-caliber subgun market. Now, with the launch of ...

Product Description

Enhance Your MPX Trigger

When SIG Sauer released its revolutionary MPX platform, it was set to revolutionize the pistol-caliber subgun market. Now, with the launch of the Timney Triggers MPX Single-Stage Trigger, owners can take this enhanced platform to an even higher level.

Designed to enhance the feel above the OEM trigger design, the Timney Triggers MPX Single-Stage Trigger drops right into the receiver of the MPX without any modification. Each trigger assembly is built with components made from heat-treated steel, all contained in an aluminum-alloy housing with an anodized finish.

Each Timney Triggers MPX Single-Stage Trigger is set from the factory for a pull weight of 3 pounds and cannot be adjusted. The trigger is compatible with all factory and aftermarket safeties on the MPX platform.

Ar-15 Saber Drop In Single Stage Trigger James Madison Tactical.

$94.99
With a fast reset, a smoother, crisper, lighter trigger pull, The single-stage trigger group is easy to install. Features: ...

Product Description

With a fast reset, a smoother, crisper, lighter trigger pull, The single-stage trigger group is easy to install.

Features:

  • Single-stage
  • Works for both AR-15 and AR-308 type rifles
  • 3.5- 4.0 lb. pull weight
  • Quick reset for faster response time between shots
  • Lightened trigger pull with super-crisp release to improve accuracy
  • Curved skeleton trigger function and comfort
  • Self-contained design makes it easy and quick to install with no fine-tuning needed
  • Quality 17-4 Stainless steel hammer, trigger and disconnect
  • Precision CNC and EDM machined from high-grade 6061-T6 aluminum and 17-4 ph SS
  • Contained in JMT’s signature metallic silver anodized aluminum housing
  • Comes with anti-rotation pins

Note: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.


Big Book Catalog, Issue:71, Page:030

Ar-15 Enhanced Military-Style Triggers Alg Defense.

$53.99 - $75.99
Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. ...

Product Description

Gives A Smoother Pull While Preserving Reliability

Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6½ lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs.


AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:255

SPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high-carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, 2 hammer springs, disconnnector, disconnnector spring, hammer and trigger pins, and instructions.?

Ar-15 Super Select-Fire Sopmod Trigger Geissele Automatics Llc.

$467.99
The Geissele Super Select-Fire (SSF®) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The ...

Product Description

The Geissele Super Select-Fire (SSF®) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger that is available in 4.5lb. and 5.5lb. configurations. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt hammer release. The SSF is safety certified by Crane Naval Surface Warfare Center. NSN# 1005-01-618-8104

All NFA rules apply to the sale of the SSF trigger.

ADDITIONAL INFORMATION:

  • Size Standard Mil-Spec Pin
  • Trigger Bow Type M4 Curved
  • Weapon Platform M16

Ar-15 Tactical Trigger Group Cmc.

$167.99
CMC’s self-contained, drop-in trigger module replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, clean pull with ...

Product Description

Drop-In Trigger Module Is Factory Tuned For A Super Smooth, Clean-Breaking Pull

CMC’s self-contained, drop-in trigger module replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, clean pull with a consistent, pre-set pull weight. Originally designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade, single-stage trigger without having to fit and adjust multiple components.

A rigid, steel, trigger housing holds all the factory-tuned internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is tweaked at the factory to minimize take-up and over-travel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger.

Two, slightly oversized center pins replace the standard, trigger/hammer pins to save wear, reduce friction, and prevent trigger wobble; "Chicago"-style screws prevent pin walk.

CMC single-stage AR-15 triggers are available with traditional Curved trigger shoe, or skeletonized Flat shoe that provides a different feel some shooters prefer and gives your AR a distinctive look.

Two-stage models also available - see separate listing.

 


AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:254

SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Fixed pull weight is not user-adjustable. Includes two (2) Chicago-style center pins. Fits AR-15 (or AR-308 that uses AR-15 trigger) with .154" diameter trigger and hammer pins.

Remington 700 Calvin Elite Trigger Timney.

$204.37 - $233.96
Self-contained drop in trigger. Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated Tool steel ...

Product Description

  • Self-contained drop in trigger.
  • Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated Tool steel trigger and sears.
  • Featuring a double sear design.
  • Timney Golden Elite colored housing.
  • Two position, trigger blocking side safety.
  • Fully adjustable Sear Engagement, Over-travel, and pull weight from 8oz.-2.5lbs.
  • Available in blue(black) and Nickel Plated.
  • Teflon nickel coated Sears to guarantee a lifetime of reliable service.
  • Backed by the Legendary Timney Lifetime No Hassle Warranty and Customer service.
  • Calvin Elite Trigger with Safety and Adjustable Shoe features a Red Shoe


Big Book Catalog, Issue:71, Page:166
Sinclair, Issue:5B, Page:257